Flat & Wedge Seals

Lion Flat & Wedge Seals

These seals are used generally as bottom seals for all types of gates and the seal against the bottom sealing plate. They require high initial compression loading for proper seating. The projection of the bottom wedge seal shall vary from 2 to 5 mm depending upon the requirement and type of installation at the discretion of the designer

Flat Seal

A (mm) B (mm) Material
100 12 NR, CR, EP
100 20 NR, CR, EP
119 19 NR, CR, EP
75 12 NR, CR, EP
75 14 NR, CR, EP
A (mm) B (mm) R (mm) Material
125 25 20 NR, CR, EP
100 20 15 NR, CR, EP
100 14 10 NR, CR, EP
A  (mm) B  (mm) Material
100 8 NR, CR, EP
150 6 NR, CR, EP
100 3 NR, CR, EP
65 8 NR, CR, EP
75 12 NR, CR, EP
75 14 NR, CR, EP
120 20 NR, CR, EP
100 12 NR, CR, EP
100 14 NR, CR, EP

Wedge Seal

A (mm) B (mm) R (mm) Material
75 12 6 NR, CR, EP
75 14 7 NR, CR, EP
100 20 10 NR, CR, EP
100 14 7 NR, CR, EP
A (mm) B (mm) C (mm) D (mm) Material
75 12 6 6 NR, CR, EP
75 14 18 8 NR, CR, EP
75 16 10 10 NR, CR, EP
  • All above dimensions are in mm. Above data is for reference purpose only.
  • Any customized Project & Product requirements can be catered by Lion Rubber’s Design & Development Team.

Enquire Now

Enquire Now